Water meters, heat meters and radio remote reading systems, smart meters.
Wireless solutions IOT: radio applications.


G2 Colombia

Remote reading for consumption measurement

Remote reading for consumption measurement: Wireless M-Bus repeater R-WMBUS

Remote reading for consumption measurement: Wireless M-Bus repeater R-WMBUS.

M-Bus wireless

M-Bus wireless

OMS - Open Metering System

OMS - Open Metering System

  • Radio signal repeater from meter /heat allocator to datalogger DL-WMBUS
  • It is fitted with MESH interface and supports multi-hop to receive and transmit the data
  • It can be mounted directly on the wall through screws and, as option, can be mounted on a stand through a specific mounting kit
  • The received signals are transmitted immediately without variable time-shifting

Remote reading for consumption measurement: Datalogger wireless M-Bus DL-WMBUS

Remote reading for consumption measurement: Datalogger wireless M-Bus DL-WMBUS

M-Bus wireless

M-Bus wireless

OMS - Open Metering System

OMS - Open Metering System

  • Working as DATALOGGER both through radio and through cable
  • Connection through Ethernet to read consumption data on web page
  • It manages up to 500 meters (see table enclosed in data sheet)
  • It is equipped with a graphical display (multi language to set up with tactile membrane key) to access data and status of local I/O
  • It is available with a remote antenna with 1,5 mt cable

Remote reading for consumption measurement: Level Converter M-Bus LC61

Remote reading for consumption measurement: Level Converter M-Bus LC61.

M-Bus

M-Bus

  • For local reading of M-Bus cable networks
  • It can manage up to 60 physical devices M-Bus slaves
  • It can be used as a repeater in order to unlimited extend an existing M-Bus network via a serial connection of twin modules on a 35mm DIN rail EN 60529 or as a signal amplifier/regenerator for long distances
  • Local memory not available
  • Power supply 24 Vac/dc

Remote reading for consumption measurement: Rtu Datalogger M-Bus wired DL-LC61

Remote reading for consumption measurement: Rtu Datalogger M-Bus wired DL-LC61.

M-Bus

M-Bus

  • For remote reading of meters connected to the LEVEL CONVERTER M-BUS LC61
  • Working as wired DATALOGGER
  • It manages up to 250 wired meters by adding M-Bus LC61 level converter modules
  • Connection through Ethernet to read consumption data on web page
  • It is equipped with a graphical multi language display to set up via a tactile membrane key
  • Internal memory for storage of daily readings up to 10 years/ 1 year for intra-day data coming from wired meters
  • Reading frequency via cable: from 15 min to 24 hours intervals
  • 12-24V ac/dc power supply or Power over Ethernet (PoE)
  • Mounting by 35mm DIN rail (EN 60715)

Remote reading for consumption measurement: Pulse adaptor AI03

Remote reading for consumption measurement: Pulse adaptor AI03

M-Bus

M-Bus

  • Pulse adaptor allows the use of up to 2 meters, to connect separately
  • Suitable to translate a reed contact into a signal for M-Bus networks
  • Wall mounting
  • W x H x D (80 x 80 x 52) mm
  • Protective class IP54

Remote reading for consumption measurement: Modem MD02

Remote reading for consumption measurement: Modem MD02.

M-Bus wireless

M-Bus wireless

OMS - Open Metering System

OMS - Open Metering System

  • Modem with wireless connection to datalogger DL-WMBUS and ethernet connection to datalogger DL-LC61
  • UMTS and GSM quadband compact router / modem
  • Working through SIM data for mobile service
  • High speed to transfer HSPA data up to 21 Mbps DL and 5,76 Mbps UL
  • Very reliable connection to internet (Auto reboot in case of lost connection)
  • LAN and WIFI (4 ethernet gates) interfaces
  • Power supply AC/DC 100-240 Vac -> 9Vdc with wall supply

Remote reading for consumption measurement: Portalle receiver wireless M-Bus RPWMB

Remote reading for consumption measurement: Portalle receiver wireless M-Bus RPWMB.

M-Bus wireless

M-Bus wireless

OMS - Open Metering System

OMS - Open Metering System

  • Walk-by RECEIVER
  • Range up to 100 mt free field/20mt in buildings (depending from the building type and electromagnetic polluting conditions)
  • USB interface to connect via cable to a portable notebook
  • Communication via COM virtual gate
  • Compliance to Wireless M-Bus EN 13757-4:2013 standard
  • Supporting OMS standard (Opening Metering System)

Remote reading for consumption measurement: Software wireless M-BUS 1.1

Remote reading for consumption measurement: Software wireless M-BUS 1.1.
  • Working with Windows programs (Xp/Vista/7/8)
  • Windows minimum requirements: 1 MB RAM/13 MB free space on hard-disk
  • Suitable hardware:
    • Receiver USB RPWMB to receive/analyse wireless protocols coming from:
      • Heat cost allocator
      • Compact radio
      • Super-Dry with radio M-Bus module
      • Ultrasonic radio
    • Optical head with OT-USB cable for local I/O set up and reading:
      • Heat cost allocator
      • Compact radio
      • Super-Dry with radio M-Bus module
      • Ultrasonic radio