G2 misuratori S.r.l.


Homepage About us Products MID Approval Quality Download Contacts Italiano

 

>> PRODUCTS >> PULSE OUTPUT

PULSE OUTPUT
Water meters equipped with pulse emitting device or just pre-arranged

Water meters equipped with pulse emitting device

(all models available only with pre-arrangement for pulse emitting device)

available several values/litres–pulses for every need (please state the value when ordering)

Technical data sheet in PDF >>>
Download of the technical data sheet

description

  • BFUL models from DN. 13 to DN. 40
    • Single jet water meter, wet dial, for cold water up to 30°C
  • PFUL models from DN. 13 to DN. 30
    • Single jet water meter, liquid-filled sealed counter model, for cold water up to 30°C
  • SFUL and AFUL models from DN. 13 to DN. 40
    • Single jet water meter, dry dial, for cold water up to 30°C
  • SCUL and ACUL models from DN. 13 to DN. 40
    • Single jet water meter, dry dial, for hot water up to 90°C
  • BFML model from DN. 13 to DN. 50
    • Multi jet water meter, wet dial, for cold water up to 30°C
  • PFML model from DN. 13 to DN. 50
    • Multi jet water meter, liquid-filled sealed counter model, for cold water up to 30°C
  • AFML model from DN. 13 to DN. 50
    • Multi jet water meter, dry dial, for cold water up to 30°C
  • ACML model from DN. 13 to DN. 50
    • Multi jet water meter, dry dial, for hot water up to 90°C
  • WELF model from DN. 50 to DN. 300
    • Helical vane – dry dial, for cold water up to 50°C
  • WELC model from DN. 50 to DN. 300
    • Helical vane – dry dial, for hot water up to 120°C

HALL SENSOR
Water meters equipped with a pulse emitting device, based on Hall sensors

Water meters equipped with a STATIC pulse emitting device, based on Hall sensors

Technical data sheet in PDF >>>
Download of the technical data sheet

descrizione

  • Multi and single jet meters, wet dial type (BFM - BFU), liquid filled sealed counter type (PFM - PFU) and fully liquid sealed counter type (QDFM - QDFU), metrological class C, equipped with a STATIC pulse emitting device, based on Hall sensors
  • 5 wired- Hall sensor, sensing and transmitting data to a consumption measuring system, which can detect the flow direction
  • The combined use of Hall sensors and a microprocessor enables to discover 2 types of tampering:
    • the sensor being removed from the meter
    • the cable being severed and external magnets
  • The device is powered by a 15-year-long life lithium battery. The device guarantees an IP 68 protection class, making it suitable for pitch installations, where flood risk is high
  • The tests on the emitting device, done by the Notified Body, satisfy the provisions set by the law n. 22/07 on legal metrological audits

 up



G2 misuratori S.r.l.
Via San Martino, 38
14100 ASTI - ITALY
Tel. +39 0141 727749
Fax +39 0141 702280
e-mail: info@g2misuratori.it

© 1999 - G2 misuratori S.r.l. - All rights reserved


web design by CLARiD